Evaluation of two rotational helmet technologies to decrease peak rotational acceleration in cycling helmets

Scientific Reports volume 12, Article number: 7735 (2022) Cite this article

2022 Accesses

4 Citations

12 Altmetric

Metrics details

The risk of brain trauma has been associated with the rotational kinematics leading to the development of helmets with a variety rotational management technologies. The purpose of this paper was to employ a rotation specific test protocol to evaluate the effectiveness of two of these technologies. Dynamic response of the head was measured to assess the performance of each technology. Three cycling helmets with identical construction were included in this study. One helmet with no rotational technology, an established, commercial technology and a novel helmet rotational technology designed and assembled by the authors were tested. A drop test onto a 45° anvil was used to measure the ability of each helmet to manage the dynamic response of the head form during a series of impacts. The results revealed both rotational helmet technologies resulted in lower peak rotational acceleration and brain strain, however each technology demonstrated unique performance characteristics depending on the impact condition.

The health care system in the United States requires two billion dollars a year to treat and manage head injuries in the general population1,2. Accounting for 30% to 40% of hospitalizations for children and adolescents3, concussion is the most common cause for head injuries in children while cycling. Sport-related concussions in general have been described as a “silent epidemic”, with the prevalence and effects of these injuries not fully described1,2,3,4,5. Helmet technologies have been developed to minimize the risk head trauma including concussions from head impacts in sport5,6,7,8. While they have proven useful in reducing head injuries in cycling, the mechanism of injury associated with concussion is not fully reflected in current helmet testing protocols9,10,11,12. Rotational kinematics describing head dynamics during impacts has been associated with diffuse brain injuries including concussion9,10,11,13,14,15,16,17. However, the effectiveness of sport helmets to manage head trauma typically involves measuring linear acceleration using a vertical drop test to a flat anvil18. Post et al.19 and Rowson et al.20 reported a weak relationship between peak rotational and linear accelerations for head impacts. While several test methods have been employed, to date no cycling helmet test standard includes a rotational performance criterion10,12,14,21,22,23,24,25,26,27. A proposed high friction impact test protocol was used to measure a helmets capacity to manage rotational acceleration. It included a free drop helmeted head form to an angled impacting anvil fitted with high friction sandpaper.

Cycling helmet manufacturers increased interest in integrating effective rotational management technologies into cycling helmets followed reports that rotational impact characteristics are important predictors of risk for concussive injuries6,10,11,12.

The purpose of this study was to evaluate the capacity of two rotational helmet technologies fitted to the same make and model of cycling helmet to manage impact trauma using a high friction impact test protocol.

Three identical medium sized cycling helmets were included in this study: a commercially available cycling helmet with no rotational technology, a commercially available cycling helmet with rotational technology low-friction layer (MIPS, Multi-Directional Impact Protection System, Sweden), and a commercially available cycling helmet fitted with a novel rotational technology composed of fluid filled bladders (Fig. 1). All three helmets were composed of a polycarbonate micro shell, expanded polystyrene liner, Koroyd® inserts, fit pads, and a chinstrap. The sample size included four helmets for each helmet type for a total of twelve helmets.

Cycling helmets tested, standard helmet (top), Technology #1 (MIPS), (centre), and Technology #2, (bottom).

A number of rotational mitigation technologies have been introduced to the market including Wavecell a copolymer structure, SPIN a foam gel material, Leatt 360° turbine, 6D ODS suspension technology and Atomic AMID with a compression—shear material. The technologies used in this research included the industry leader Multi-Directional Impact Protection System, MIPS system and a novel fluid filled bladder technology. For this research helmet 1 (Standard Liner) was a standard commercially available helmet with no rotational management technology. Helmet 2, identified as Technology #1 was a commercially available cycling helmet with a rotational acceleration management system (Multi-Directional Impact Protection System, MIPS) and Helmet 3 identified as Technology #2 had the fit foam replaced three thermoplastic urethane (TPU) bladders containing low-viscosity fluid arranged to produce a low friction response between the head and the liner28,29. Each bladder was composed of TPU 85 plastic film, containing 3 ml of colorless mineral oil with an overall diameter of 65 mm and thickness of 3 mm. The thickness (3 mm) was the same as the fit foam they replaced to ensure proper fit. The helmets with rotational technologies did increase helmet mass slightly (25–45 g)30. Other than the rotational technologies all three helmets were identical in construction (Fig. 1).

A monorail drop rig system manufactured by Cadex Impact Inc. (St. Jean-sur-Richelieu, Quebec, Canada) as shown in Fig. 2 was used to impact the helmets. This apparatus was used in conjunction with a Hybrid III head form to perform a free drop. The halo supported the helmeted head form and passes around the anvil to allow an accurate impact to the headform location without interference from the travelling rig or anvil. An adjustable laser velocity measurement device was used to obtain the velocity of the headform just before impact. While several test methods that use neck forms are available, a free drop system was chosen for this research to ensure the effect of the neck form on the head form response was minimized30,31,32,33. The Hybrid III head form was used to include the most common 3-2-2-2 acceleration array34,35.

Drop rig, halo and 45° anvil with the sandpaper affixed.

A 50th-percentile Hybrid III head form was placed on the monorail drop rig fitted with a free drop halo Fig. 2. The Hybrid III head form was fitted with nine-uniaxial Endevco accelerometers in a 3-2-2-2 array collecting at 20,000 Hz. The 3-2-2-2 Array was based on Padgaonkar et al.’s35 research to capture both rotational and linear accelerations. The accelerometers were connected to a DTS TDAS-Control (DTS, San Juan Capistrano, California, USA) control module used in impact simulations. The signals were processed using a CFC 1000 filter according to SAE J211 convention.

The helmet was fixed to the head form using the retention strap and checked to ensure it was aligned to the same landmarks on the head form. The helmeted head form was placed on a halo attached to a monorail and dropped onto a 45° angled anvil with 80-grit sandpaper adhesive applied to the surface9,36,37. The impacting velocity was set at 6.5 m per second (SD ± 0.2). The impact locations included front (Rot Y axis), side (Rot X axis), crown (Rot Y axis), and rear (Rot Y axis) and defined relative to the angled impactor (Fig. 3).

Headform placement for impacting the anvil in the front, rear (back), side and crown conditions.

To obtain maximal principal strain (MPS) for cycling helmeted impacts, the linear and rotational loading curves for each impact were used as inputs into the University College Dublin Brain Trauma Model (UCDBTM)38,39. The model was developed using computed tomography (CT) and magnetic resonance imaging scans (MRI) of a male human cadaver to develop the head geometry of the UCDBTM40. The three-dimensional finite element model included the scalp, skull, pia, falx, tentorium, cerebrospinal fluid (CSF), grey and white matter, cerebellum and brain stem, represented by approximately 26,000 hexahedral elements40. The brain tissue was characterized as viscoelastic in shear with its brain behaviour represented by a linear viscoelastic model. The compressive nature of the brain tissue was defined as elastic. Shear characteristic of the viscoelastic brain was represented by the Eq. (1), where G1, is defined as the long-term shear modulus, G0, is the short-term shear modulus, and b is the decay factor40:

Validation of the UCDBTM was performed against cadaveric pressure responses and brain motion research38,40 Hardy et al.39. Comparisons of the model’s intracranial pressure response were also made to Nahum et al.41 experiments involving impacts with both rotational and linear acceleration components. The intracranial pressure response of the model was also found to be in good agreement with the cadaveric pressure responses of Hardy et al.38 with respect to general shape and duration Horgan and Gilchrist40. The brain motion traces of the model were found to be similar to research conducted by Trosseille42 Further examination of the model was performed using reconstructions of real-world brain injury incidents in which good agreement was found for magnitudes of brain stresses and strains compared to the literature. The peak strain values for the white matter and the grey matter are reported as the maximal principal for white matter and grey matter. It should be noted that the maximal principal strain values are included in this paper as a measure of brain trauma and do not represent levels of brain injury. For that reason, strain values were not included in the statistical analysis.

A series of repeated-measures ANOVAs compared peak resultant linear and rotational acceleration for each helmet type. An ANOVA was completed for each of the impacted locations with comparisons of the effect for each helmet technological strategy to baseline and comparing each helmet technology. Pairwise comparisons (α = 0.05) were run for each metric, peak linear and rotational acceleration.

A statistical analysis was completed for the dynamic response (peak linear and rotational acceleration) variables. The maximal principal strain for grey and white matter were included in the results for reference only. For the front impact location pairwise comparisons for peak linear acceleration revealed no significant differences between the standard liner and technology #1 (p = 0.230), and technology #1 and technology #2 (p = 0.159). However, there was a significant reduction for peak linear acceleration between the standard liner and technology #2 (p = 0.026). For peak rotational acceleration there were significant differences between the standard helmet and technology #1 (p = 0.006), the standard helmet and technology #2 (p = 0.000), as well as between technology #1 and #2 (p = 0.000) (Table 1; Fig. 4).

Bar graph displaying peak linear acceleration results in g for impact location and helmet type.

For the side impact location, pairwise comparisons for peak resultant linear acceleration responses revealed no significance between the standard liner and technology #1 (p = 0.078) (Fig. 5). There were significant differences between the standard liner and technology #2 (p = 0.001) and between technology #1 and technology #2 (p = 0.010). For peak rotational acceleration pairwise comparisons revealed all three helmet types were significantly different from each other; the standard liner compared to technology #1 (p = 0.002), standard liner compared to technology #2 (p = 0.000) (Table 2).

Bar graph displaying peak rotational acceleration results in radians per second squared (Rad/s2) for impact locations and helmet type.

For the crown impact location pairwise comparisons revealed no significance for peak linear acceleration between the standard liner and technology #1 (p = 0.344) or between technologies #1 and #2 (p = 0.778). There was a significance difference between the standard liner and technology #2 (p = 0.034). For peak rotational acceleration pairwise comparisons revealed no significant difference between the standard liner and technology #1 (p = 0.344) and technologies #1 and #2 (p = 0.778) however there was significance between standard liner and technology #2 (p = 0.778) (Table 3; Fig. 5).

For the rear location, pairwise comparisons for peak linear and rotational accelerations between helmet types revealed no significant differences (Table 4; Figs. 4 and 5).

The testing protocol used in this research identified differences between the capacity of the three helmets tested in managing peak linear and rotational acceleration (Tables 1, 2, 3, 4). The low friction layer in technology #1 (MIPS) and fluid-filled bladders in technology #2 reduced the peak linear and rotational accelerations. While both technologies consistently outperformed the conventional helmet technology #2 was more effective in managing both linear and rotational accelerations for the front and side impacts. While technology #2 did significantly decrease linear and rotational acceleration for the crown impact site technology #1 did not perform as well (Fig. 5). Differences in the two technology structures likely contributed to the differences in the ability of the two technologies in managing linear and rotational accelerations for the four impact sites. Both technologies decreased peak linear and rotational accelerations at the rear impact site, however it was not statistically significant. This finding was not unexpected as both rotational technologies did not fully cover the rear impact site. As well, there was pronounced geometry at the rear impact site increasing the variance in the measurements thus decreasing the likelihood of statistical significance. The standard cycling helmet did not manage dynamic response during impacts as effectively as the two helmets with rotational technology. The two rotational technologies also resulted in decreased strain for both the grey and white matter when compared across all impact conditions (12.70–27.16%). The results demonstrated the two rotational technologies in this study were effective in decreasing peak linear and rotational acceleration for the conditions tested (Fig. 5). While no attempt was made to optimize the rotational technologies for specific impact conditions including impact location and direction these results support the notion that a specific technology may be more effective in managing rotational acceleration under specific impact conditions. Further research should consider investigating the opportunity to optimize helmet performance using to impact condition specific technology. The improved protection provided by rotational technology in this research supports the importance of including rotational test protocols in helmet certification standards.

As with all laboratory research not involving human participants the application and interpretation of these results must consider the limitations of the tools used to measure the impact trauma. The impacts used in this testing did not include a specific test to create acceleration around the Z axis. The association of acceleration in this axis with the risk for brain trauma supports adding an impact to create acceleration in the Z axis in future research. This research involved two unique technologies as examples of rotational management technologies and cannot be considered representative of other rotational technologies. The shell geometry of this helmet is considered aerodynamic; thus, the shape is not round. These conclusions are specific to cycling helmets tested and may be different for other helmets. The scope of the research was limited to head trauma in cycling43,44,45,46. Finally, the impacting protocol was a modification of existing methods proposed by the European test method for rotational impacts Halldin et al.30,36,43.

The purpose of this work was to evaluate the effectiveness of a rotational specific test protocol in evaluating two technologies designed to decrease rotational accelerations during head impacts in cycling helmets. The findings revealed the rotational specific test demonstrated significant reductions for peak rotational acceleration for both rotational technologies when compared to the conventional helmet. Technology #1 had significant reductions in rotational acceleration for the front and side impact sites while Technology #2 had significant reductions in rotational acceleration for the front, side and crown impact sites. Each technology demonstrated unique performance characteristics depending on the impact condition. This research supports the use of helmet rotational test protocols to evaluate helmet capacity in managing the risk of head trauma.

Raw and processed physical and computational data of all variables are currently being stored at the University of Ottawa, Canada. It is available upon request as well has been available in “supplementary files”.

Amoros, E., Chiron, M., Thelot, B., Ndiaye, A. & Laumon, B. Cyclists injury epidemiology based on a road trauma registry. Injury Prev. 16(Supplement 1), A204. https://doi.org/10.1136/ip.2010.029215.727 (2011).

Article Google Scholar

Rizzi, M., Stigson, H. & Krafft, M. Cyclist injuries leading to permanent medical impairment in Sweden and the effect of bicycle helmets. In Proceedings of the International Research Council on Biomechanics of Injury (IRCOBI) Conference. 412–423 (2013).

McIntosh, A. S. Biomechanical studies of impact and helmet protection. In Concussions in Athletics (eds Slobounov, S. M. & Sebastianelli, W. J.) 167–178 (Springer, 2014).

Chapter Google Scholar

Laraque, D., Barlow, B. & Durkin, M. Prevention of youth injuries. J. Natl. Med. Assoc. 91, 557 (1999).

CAS PubMed PubMed Central Google Scholar

Larsen, L. Epidemiology of bicyclist’s injuries. In International IRCOBI Conference on the Biomechanics of Impacts, 217–230. (International Research Council on the Biomechanics of Injury, 1991).

Finan, J. D., Nightingale, R. W. & Myers, B. S. The influence of reduced friction on head injury metrics in helmeted head impacts. Traffic Inj. Prev. 9(5), 483–488. https://doi.org/10.1080/15389580802272427 (2008).

Article PubMed Google Scholar

Hoshizaki, T. B., Post, A., Oeur, R. A. & Brien, S. E. Current and future concepts in helmet and sports injury prevention. Neurosurgery https://doi.org/10.1227/NEU.0000000000000496 (2014).

Article PubMed Google Scholar

Hoshizaki, T. B. & Brien, S. E. The science and design of head protection in sport. Neurosurgery 55(4), 856–966 (2004).

Article Google Scholar

Adanty, K., Clark, J. M., Post, A., Blaine Hoshizaki, T. & Gilchrist, M. D. Comparing two proposed protocols to test the oblique response of cycling helmets to fall impacts. Int. J. Crashworthiness 25, 648–663 (2019).

Article Google Scholar

Mills, N. & Gilchrist, A. Oblique impact testing of bicycle helmets. Int. J. Impact Eng 35(9), 1075–1086. https://doi.org/10.1016/j.ijimpeng.2007.05.005 (2019).

Article Google Scholar

Post, A. & Hoshizaki, T. B. Rotational acceleration, brain tissue strain, and the relationship to concussion. J. Biomech. Eng. 137(3), 030801. https://doi.org/10.1115/1.4028983 (2015).

Article Google Scholar

Fahlstedt, M. et al. Ranking and rating bicycle helmet safety performance in oblique impacts using eight different brain injury models. Ann. Biomed. Eng. 49, 1097–1109. https://doi.org/10.1007/s10439-020-02703-w (2021).

Article PubMed PubMed Central Google Scholar

Scott, L. R. et al. Helmet use and bicycle-related trauma injury outcomes. Brain Inj. 33, 1597–1601. https://doi.org/10.1080/02699052.2019.1650201 (2019).

Article PubMed Google Scholar

DiGiacomo, G., Tsai, S. & Bottlang, M. Impact performance comparison of advanced snow sport helmets with dedicated rotation-damping systems. Ann. Biomed. Eng. 49, 2805–2813. https://doi.org/10.1007/s10439-021-02723-0 (2021).

Article PubMed PubMed Central Google Scholar

Aare, M. & Halldin, P. A new laboratory rig for evaluating helmets subject to oblique impacts. TrafficInjuryPrevention. 4(3), 240–248. https://doi.org/10.1080/15389580309879 (2003).

Article Google Scholar

Holbourn, A. H. S., Edin, M. A. & Oxfd, D. P. Mechanics of Head Injuries. Lancet 242, 438–441 (1943).

Article Google Scholar

Kleiven, S. Predictors for traumatic brain injuries evaluated through accident reconstruction. Stapp Car Crash J. 51, 81–114 (2007).

PubMed Google Scholar

Ommaya, A. K. & Gennarelli, T. A. Cerebral concussion and traumatic unconsciousness: Correlation of experimental and clinical observations on blunt head injuries. Brain 97(4), 633–654 (1974).

Article CAS Google Scholar

Post, A., Lauren Dawson, T., Hoshizaki, B., Gilchrist, M. D. & Cusimano, M. D. Development of a test method for adult ice hockey helmet evaluation. Comput. Methods Biomech. Biomed. Engin. 23(11), 690–702. https://doi.org/10.1080/10255842.2020.1758680 (2020).

Article Google Scholar

Rowson, S. et al. Rotational head kinematics in football impacts: An injury risk function for concussion. Ann. Biomed. Eng. 40(1), 1–13 (2012).

Article Google Scholar

Bottlang, M., Rouhier, A., Tsai, S., Gregoire, J. & Madey, S. M. Impact performance comparison of advanced bicycle helmets with dedicated rotation-damping systems. Ann. Biomed. Eng. 48, 68–78 (2020).

Article Google Scholar

Post, A. & Hoshizaki, T. B. Rotational acceleration, brain tissue strain, and the relationship to concussion. J. Biomech. Eng. https://doi.org/10.1115/1.4028983 (2015).

Article PubMed Google Scholar

Abderezaei, J., Rezayaraghi, F., Kain, B., Menichetti, A. & Kurt, M. An overview of the effectiveness of bicycle helmet designs in impact testing. Front. Bioeng. Biotechnol. https://doi.org/10.3389/fbioe.2021.718407 (2021).

Article PubMed PubMed Central Google Scholar

Abayazid, F., Ding, K., Zimmerman, K., Stigson, H. & Ghajari, M. A new assessment of bicycle helmets: The brain injury mitigation effects of new technologies in oblique impacts. Ann. Biomed. Eng. 2021, 1–18. https://doi.org/10.1007/s10439-021-02785-0 (2021).

Article Google Scholar

Hansen, K. et al. Angular impact mitigation system for bicycle helmets to reduce head acceleration and risk of traumatic brain injury. Accid. Anal. Prev. 59, 109–117. https://doi.org/10.1016/j.aap.2013.05.019 (2013).

Article PubMed PubMed Central Google Scholar

Stigson, H., Rizzi, M., Ydenius, A., Engström, E. & Kullgren, A. Consumer testing of bicycle helmets. In International Research Council on the Biomechanics of Injury Conference (IRCOBI Conference), 13–15 (International Research Council on Biomechanics of Injury, 2017).

Willinger, R., Deck, C., Halldin, P. & Otte, D. Towards advanced bicycle helmet test methods. In International Cycling Safety Conference, 18–19 (The Centre for Accident Research and Road Safety-Queensland, 2019).

Hoshizaki, T. B., Post, A. & Rousseau, P. US Patent 13739699. (2013).

Hoshizaki, T. B., Post, A. & Rousseau, P. CANADA Patent 2864522. (2013).

Fahlstedt, M., Halldin, P., S Alvarez, V. & Kleiven, S. Influence of the body and neck on head kinematics and brain injury risk in bicycle accident situations. In IRCOBI 2016, 459–478 (International Research Council on the Biomechanics of Injury, 2016).

Cournoyer, J., Koncan, D., Gilchrist, M. D. & Hoshizaki, T. B. The influence of neck stiffness on head kinematics and maximum principal strain associated with Youth American Football Collisions. J. Appl. Biomech. 37, 288–295. https://doi.org/10.1123/jab.2020-0070 (2020).

Article Google Scholar

Walsh, E.S., Kendall, M., Hoshizaki, T.B. & Gilchrist, M.D. Dynamic impact response and predicted brain tissue deformation comparisons for an impacted hybrid iii headform with and without a neckform and torso masses. In Proceedings of the IRCOBI Conference, Sept 10–12, Berlin, Germany (2014).

Walsh, E., Kendall, M., Post, A., Meehan, A. & Hoshizaki, T. B. Comparative analysis of Hybrid III neckform and an unbiased neckform. Sports Eng. 21(4), 479–485. https://doi.org/10.1007/s12283-018-0286-x (2018).

Article Google Scholar

Kendall, M.,Walsh, E. S. & Hoshizaki, T. B. Comparison between Hybrid III and Hodgson-WSU headforms by linear and angular dynamic impact response. In Proc. Inst. Mech. Eng. Part P: J. Sports Eng. Tech. Vol. 226, 260–265 (2012) https://doi.org/10.1177/1754337112436901.

Padgaonkar, A. J., Kreiger, K. W. & King, A. I. Measurement of angular acceleration of a rigid body using linear accelerometers. ASME J. Appl. Mech. 42(3), 552–556 (1975).

Article ADS Google Scholar

Halldin, P. CEN/TC 158 Working Group 11—Rotational test method—proposal for a new test method measuring the head kinematics in angled helmeted impacts. CENELEC. (2015).

Petersen, P. G., Smith, L. V. & Nevins, D. The effect of surface roughness on oblique bicycle helmet impact tests. In Proc. Inst. Mech. Eng. Part P: J. Sports Eng. Tech. Vol. 234, 320–327. (2020) https://doi.org/10.1177/1754337120917809.

Horgan, T. J. & Gilchrist, M. D. Influence of FE model variability in predicting brain motion and intracranial pressure changes in head impact simulations. Int. J. Crashworthiness. 9(4), 401–418 (2004).

Article Google Scholar

Hardy, W. N. et al. Investigation of head injury mechanisms using neutral density technology and highspeed biplanar X-ra. Stapp Car Crash J. 45, 337–368 (2001).

CAS PubMed Google Scholar

Horgan, T. J. & Gilchrist, M. D. The creation of three- dimensional finite element models for simulating head impact biomechanics. Int. J. Crashworthiness. 8(4), 353–366 (2003).

Article Google Scholar

Nahum, A. M., Smith, R. & Ward, C. C. Intracranial pressure dynamics during head impact. In Strapp Car Crash Journal. Vol. 21, 339–366. (1977)

Trosseille, X. et al. Development of a F.E.M. of the Human Head According to a Specific Test Protocol, SAE Technical Paper 922527; (1992).

Bourdet, N. et al. In-depth real-world bicycle accident reconstructions. Int. J. Crashworthiness 19(3), 222–232. https://doi.org/10.1080/13588265.2013.805293 (2014).

Article Google Scholar

Bliven, E. et al. Evaluation of a novel bicycle helmet concept in oblique impact testing. Accid. Anal. Prev. 124, 58–65 (2019).

Article Google Scholar

Ching, R. P. et al. Damage to bicycle helmets involved with crashes. Accid. Anal. Prev. 29(5), 555–562. https://doi.org/10.1016/s0001-4575(97)00008-0 (2019).

Article Google Scholar

Bland, M. L., McNally, C. & Rowson, S. Headform and neck effects on dynamic response in bicycle helmet oblique impact testing. In Proceedings of the IRCOBI Conference, 413–423. (International Research Council on Biomechanics of Injury, 2018).

Download references

Department of Kinesiology, University of Waterloo, 200 University Avenue West, Waterloo, ON, N2L 3G1, Canada

Thomas Hoshizaki

Department of Human Kinetics, University of Ottawa, Ottawa, Canada

Andrew M. Post & T. Blaine Hoshizaki

School of Kinesiology, Lakehead University, Thunder Bay, Canada

Thomas Hoshizaki, Carlos E. Zerpa & Elizabeth Legace

School of Mechanical and Materials Engineering, University College Dublin, Dublin, Republic of Ireland

Andrew M. Post & Michael D. Gilchrist

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

T.H. conceptualized the study, collected the data, analyzed and wrote the manuscript. A.P. helped with the data analysis and interpretation. E.L. prepared Figs. 1, 2, 3. M.G. developed the FE model. T.B.H. conceptualized and also wrote the manuscript. C.Z. assisted with conceptualization. All authors reviewed the manuscript.

Correspondence to Thomas Hoshizaki.

The authors declare no competing interests.

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and Permissions

Hoshizaki, T., Post, A.M., Zerpa, C.E. et al. Evaluation of two rotational helmet technologies to decrease peak rotational acceleration in cycling helmets. Sci Rep 12, 7735 (2022). https://doi.org/10.1038/s41598-022-11559-0

Download citation

Received: 12 January 2022

Accepted: 26 April 2022

Published: 11 May 2022

DOI: https://doi.org/10.1038/s41598-022-11559-0

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

Annals of Biomedical Engineering (2023)

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.